HP ProLiant DL160 G5p Software Configuration Manual page 50

Review and modify the selection as necessary, then click Next to continue.
If you selected the Custom install option, pre-determined packages have already been selected.
However, depending upon your network environment additional packages may be necessary.
NOTE: Remember to select the appropriate package groups that match your network settings. For
example, the DNS Name Server package may be required if you have set-up your new server to be
the DNS controller.
Section3. Installing Red Hat Enterprise Linux 4
About to Install
Once you complete the customization, the installation program asks for confirmation before
proceeding with the install.
Click Next to proceed with the installation.
1.
On the Required install media dialog box, click Continue to start installation.
2.
You may be prompted to insert the rest of the RHEL4 CD-ROMs, depending on the packages you have
chosen to install.
Complete Installation
After completing the installation, click Reboot to close the installation program and reboot the system.
Section4. Configuring the initial setup settings
Once the system reboots, the new Red Hat environment is loaded. You need to configure the initial
setup settings.
Welcome
Click Next to start the initial setup configuration.
License Agreement
Read the license agreement. If the terms of the agreement are acceptable, click Next.
Date and Time
Modify the Date and Time settings, then click Next to continue.
Display
Retain the default display setting, then click Next to continue.
System User
Skip the option to create a new user, then click Next to continue.
1.
On the Warning dialog box, click Next to continue.
2.
Additional CDs
Ignore this page. Click Next to continue.
Finish Setup
The initial setup configuration is complete. Click Next to proceed to the login window.
Login
Type root and the password you set during the NOS installation, then press Enter.
NOS installation 50