Ide Configuration Submenu - HP ProLiant DL160 G5p Software Configuration Manual

IDE Configuration submenu

Figure 7 IDE Configuration submenu
Table 6
IDE Configuration submenu fields
Field Description
ATA/IDE Configuration
Set this value to support Enhanced mode. The Setting default
value is Enhanced.
Set this value to prevent the computer system from using IDE
and SATA device.
Setting this mode to support compatible mode.
Configure SATA as Setting this value configure SATA as IDE mode. The Setting
default value is IDE.
Setting this value configure SATA as RAID mode.
Legacy IDE Channels Set this value only support SATA device.
Set this value support PATA as primary device, select SATA
as secondary device.
Note: Select this mode; Only support SATA port2, SATA port
4, and IDE device.
Options
Enhanced
Disabled
Compatible
IDE
RAID
SATA Only
PATA Pri.
SATA Sec
System BIOS configuration 15