HP ProLiant DL160 G5p Software Configuration Manual page 22

Figure 13 Watchdog Configuration submenu
Table 12
Watchdog Configuration submenu fields
Field
POST Watchdog Timer
Action
BMC Watch Dog Time
Out
Description
Set this value to allow BMC to reset if the
operating system crashes or hangs. The setting
default value is Reset System.
Disabling this option disables any BMC action if
OS crashes or hangs.
Set this value to allow BMC to power down if
the operating system crashes or hangs.
Set this value to allow BMC to power cycle if
the operating system crashes or hangs.
Sets a 10 minute timeout value for BMC to wait
before assuming the system has crashed and
needs to reset. The setting default value is 10
minutes.
Sets a 5 minute timeout value for BMC to wait
before assuming the system has crashed and
needs to reset.
Sets a 15 minute timeout value for BMC to wait
before assuming the system has crashed and
needs to reset.
Options
Reset System
Disabled
Power Down
Power Cycle
10 Min
5 Min
15 Min
System BIOS configuration 22