Removal Of Flexible Card Wire; Removal Of Pr-80 Board - Sony LDP-1500P Service Manual

2-4. REMOVAL OF FLEXIBLE CARD WIRE
1) Pull the flexible shield (B) in the direction shown by the arrow
@
to remove it with pressing the
0
part of the flexible
shield (B) in the direction shown by the arrow
@.
2) Remove the flexible shield (B).
2-5. REMOVAL OF PR-80 BOARD
1) Pull out the flexible card wire. (Refer to 2-4.)
2) Disconnect the seven (CN 1 - CN7) connectors.
3) Remove the (BVTP 3x6) screw and take off the PR-80 board
in the direction shown by the arrows
@
and
@.
3) Press the
(§)
part of the FN 1 connector on the PR-80 board in
the direction shown by the arrow
©
to pull out the flexible
card wire.
· PR-80 board
connector (FN1)
flexible card w i r e ~
PR-BO board
2-3