Sony LDP-1500P Service Manual page 19

3. Place the disc with the desired program label facing up.
Place in the indentation.
4. Press the OPEN/CLOSE button. The disc starts rotating and the lamp
on the PLAY button blinks for a few seconds. Playback begins
automatically when the lamp lights up.
To stop the playback
Press the PAUSE button. A still picture will be displayed on the monitor
screen for GAV discs, and the video picture will be muted for CLV discs.
If any function button is pressed, playback will begin in the selected mode
from the point at which the PAUSE button was pressed.
To remove the disc
Press the OPEN/CLOSE button to stop the playing of the disc, no matter
what mode the player is in.
The disc will stop rotating, and the disc compartment will be ejected.
Notes
• At the beginning of the playback, the picture may be distorted. This
symptom tends to occur especially when a CLV disc is used.
• To avoid damaging the disc, do not move the videodisc player while
it is operating or while it contains a disc.
1-16