Note: Follow the disassembly procedure in the numerical order given.
2-1. TOP CASE REMOVAL
2 Two tapping screws
2-2. TRAY PANEL ASSY REMOVAL
4 Tray panel assy
2 Pull the tray panel assy
in the direction of arrow B.
1 Insert a tapering driver into the aperture of the
unit bottom, and move the lever of chuck cam
in the direction of arrow A.
SECTION 2
DISASSEMBLY
4 Top case
3 Screw (B3)
1 Two tapping screws
3 Two claws
B
A
2-3. FRONT PANEL BLOCK ASSY
REMOVAL
1 Two screws (B3)
4 Claw
3 Two claws
2-4. FL-125 BOARD REMOVAL
4 Flexible flat cable
(FLI-001/FLI-002)
(CN701)
2 Two screws
(B3)
1 Flexible flat cable
2-1
DVP-NS900V
6 Flexible flat cable
(CN802)
5
2 Claw
7 Front panle block assy
3
5 FL-125 board
(FLR-002/FLR-003)
(CN702)