The seat belts in the passenger seating positions are
equipped with either a Switchable Automatic Locking
Retractor (ALR) or a cinching latch plate or both. Both
types of seat belts are designed to keep the lap portion of
the seat belt tight around the child restraint so that it is not
necessary to use a locking clip. The ALR retractor can be
"switched" into a locked mode by pulling all of the
webbing out of the retractor and then letting the webbing
retract back into the retractor. If it is locked, the ALR will
make a clicking noise while the webbing is pulled back into
the retractor. Refer to the "Automatic Locking Mode"
description in "Switchable Automatic Locking Retractors
(ALR)" under "Occupant Restraint Systems" for additional
information on ALR. The cinching latch plate is designed to
hold the lap portion of the seat belt tight when webbing is
pulled tight and straight through a child restraint's belt
path.
Please see the table below and the following sections for
more information.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81
Lap/Shoulder Belt Systems For Installing Child
Restraints In This Vehicle
Regular Cab Automatic Locking Retractor (ALR)
Locations
• ALR = Switchable Automatic Locking Retractor
•
Top Tether Anchorage Symbol
2