Rear Lamp Bar Id Marker (Dual Rear Wheels) - If Equipped - Dodge RAM TRUCK 15002017 Owner's Manual

Removing The Bulb From The Bulb Socket
Rear Lamp Bar ID Marker (Dual Rear Wheels) — If
Equipped
1. Loosen the two screws and the housing to gain access to
the bulb sockets.
MAINTAINING YOUR VEHICLE 673
Screw Locations
2. Turn the socket ¼ turn counterclockwise to access the
bulb.
3. Pull the bulb straight out from the socket.
4. Reverse the procedure for installation of the bulbs and
housing.
7