Gold's Gym WHIRLWIND 390 User Manual page 15

ADJUSTING THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, the Right Shield (18) must be moved. Remove
the four M4 x 25mm Screws (69) from the Right
Shield. Lift the Right Link Arm (16) off the pedal or the
lock rod and move it clear of the Right Shield. Then,
pull the top of the Right Shield away from the Left
Shield (17).
18
17
69
69
Next, locate the Reed Switch (31). Turn the Crank Arm
(26) until the Magnet (48) is aligned with the Reed
Switch. Loosen, but do not remove, the M4 x 16mm
Flange Head Screw (27). Then, slide the Reed Switch
slightly closer to or away from the Magnet and
retighten the Screw. Turn the Crank for a moment.
Repeat until the console displays correct feedback.
16
When the Reed Switch (31) is correctly adjusted, reat-
69
tach the Right Shield (not shown).
Lock Rod
15
31
48
32
27
26