Iget SECURITY M3P13 Installation Manual

Advanced Operations
Please know exactly what you are doing when processing the operations below. It could cause errors
or erase settings which make keypad stop working.
Please disarm from keypad before any advanced operation.
Enter Setting Menu
enter:
123123
Operate Password Arm Button
operate password program password RF Coding
123456 123123 Coding
wireless Coding Factory setting system time set
address setting xx/xx/xx 12:00
Use to quit settings without saving.
Change Operate Password
operate password
successfully
123456 please input
Select Operate Password Enter New Password
Change Program Password
program password
successfully
123123 please input
Select Program Password Enter New Password
Change Wireless Control Address
This setting is used by engineers for maintenance.
Changing it might cause errors to your keypad.
We just show you the menu but hide the details for your safety.
Advanced Operations
Working with the Main Panel
Pair the keypad with the main panel first, then pair the main panel with the keypad.
After that, the main panel and the keypad could synchronize the status with each other.
① Pair the keypad with the main panel
Launch APP iGET SECURITY
② Pair the main panel with the keypad
Select RF Coding and
press confirm
Hint:
"Error Repeated Code" means the main panel
has been paired with this keypad before.
Done
Time Setting
system time set
xx/xx/xx/ xx:xx
Select System Time Set.
Done
Factory Reset
factory setting
restore
wireless Coding
Select Program Password
address
Scan the QRCode printed on the Rename the Keypad
keypad
RF Coding 4cf70c000 00000000
Coding Normal code Trigger remote
When screen shows like this, Keypad would show some
. trigger SOS from App. codes when receive any SOS
signal from main panel.
Error
Repeated code
successfully
Pairing finished.
successfully
xx/xx/xx/ xx:xx
Use and to set one by one,
Done.
Use and to adjust the time,
Press to confirm settings.
Caution: For professional use ONLY.
Reset will cause communication failure between keypad and main panel.
restore
factory settings
20141129/150
Restoring Settings Done.
with a Long Beep
Installation manual
Wireless Keypad
Done
SECURITY M3P13
us
Website : www.iget.eu E-mail : sales@iget.eu
Support: www.iget.eu/helpdesk