Exmark RADIUS Operation Manual page 37

whether or not your machine has been converted
for high altitude use, look for the following label:
Figure 24
High Altitude Label
1. Note: The engine on this product has been modified for
use at above 5,000 feet elevation. If using below 5,000
feet, it must be revised back to original specifications.
Servicing the Air Cleaner–Exmark
708cc Engine
Service Interval: Every 100 hours/Yearly
(whichever comes
first)—Service the air
cleaner paper element
(more often in dusty, dirty
conditions)(Exmark 708cc
engine).
Every 200 hours/Every 2
years (whichever comes
first)—Replace the air
cleaner paper element
(more often in dusty, dirty
conditions)(Exmark 708cc
engine).
Every 25 hours/Monthly
(whichever comes
first)—Clean the air
cleaner foam element
(more often in dusty, dirty
conditions)(Exmark 708cc
engine).
Every 100 hours/Yearly
(whichever comes
first)—Replace the air
cleaner foam element
(more often in dusty, dirty
conditions)(Exmark 708cc
engine).
Check the air cleaner daily or before starting the
engine. Check for a buildup of dirt and debris around
the air cleaner system. Keep this area clean. Also
check for loose or damaged components. Replace all
bent or damaged air cleaner components.
Note: Operating the engine with loose or damaged
air cleaner components could allow unfiltered air into
the engine causing premature wear and failure.
Note: Service the air cleaner more often under
extremely dusty, dirty conditions.
Removing the Elements:
1. Park the machine on a level surface, disengage the
blade control switch, move the motion control
levers to the brake position, stop the engine,
remove the key, and wait until all moving parts
stop before leaving the operating position.
2. Clean around the air cleaner cover to prevent dirt
from getting into the engine and causing damage.
3. Lift the cover and rotate the air-cleaner assembly
out of the engine (see Figure 25 and Figure 26).
4. Separate the foam and paper elements.
37
Maintenance
g027800
Figure 25
Figure 26
g027801