Eiki EK-501W Service Manual page 8

Place your projector correctly
Use your projector at specified location in correct way. Invalid projector location may shorten
life-cycle of lamps or even lead to severe incidents or fire. Your projector may project upward or
downward at location perpendicular to the horizon. When installing your projector inclined down-
ward, place it in a bottom up position.
Note:
● Enable the "Ceiling" function if flip over screen is required.
DO NOT install your projector in ways as illustrated below.
20
0
20
0
DO NOT tilt your projector
more than 20 degrees.
Note:
Precautions on ceiling mount
racket installation:
● Get qualified technician to install the ceiling
mount racket.
● Warranty of your projector does not cover
hazards and damage caused by using ceil-
ing mount rackets provided by unauthorized
dealers.
● Remove the ceiling mount racket when it is
not in use.
● Apply torque driver instead of power driver or
impact driver in your projector.
Safety operation guideline
DO NOT place your projector as
illustrated above.
8
M6x10
10mm
M6x10
10mm