Eiki EK-501W Service Manual page 13

Reset the filter counter
1 Press MENU button and the OSD displays.
Press button to select Setup menu,
press button or OK.
2 Press button to select "Filter Counter",
press button or OK. Press
select "Reset the filter counter" and press
OK. The "Reset filter counter?" message
displays. Select Yes to proceed.
3 In another pop-up dialog box, select Yes to
reset the filter counter.
Recommendations
Please do not use your projector at place of
dust and smoke. This may affects image qual-
ity. Using your projector in place of dust and
smoke may lead to piling dusts on lens, LCD
panel, and lens components within it. In case
like this, call your dealer or service center for
correct cleaning.
Lamp replacement
The lamp replacement icon displays when its
use life dues. Please replace it with a new one
of the same model immediately.
Note
Do not replace the lamp after it went dark as it may be broken. Always assume the
lamp of a ceiling mount your projector is broken when replacing it. Stand beside the
lamp cover instead of below it. Remove the lamp cover gently. Small piece of glass
debris may fall off when opening the lamp cover. Consult with a doctor immediately
if there is any glass debris fell in your eyes or mouth.
Note
Let your projector cool for at least 45 minutes before opening the lamp cover, as
temperature within your projector is high.
Note
Replace the lamp with a new one of the same model just in case. Do not drop or
touch the lamp! It may break and lead to personal injuries.
Regular maintenance
button to
Setting
设置
Filter counter
Filter counter
Timer
Filter counter reset
Note:
Reset the filter counter after its
cleaning or replacement.
The lamp replacement icon
Lamp replacement
13
1H
200H