Eiki EK-501W Service Manual page 37

Appendix
2. Basic commands
Distinguish the letter case, and enter Each command ends with [CR] (enter) .
Command option
C00 PoWER on
C01 PoWER oFF (Shut down immediately ) C07
C02 PoWER oFF
C36 HDmi
C05 VgA
2.1 PoWER on command
Command "C00"[CR] (Sixteen decimal value: 41 30 30 0d)
Power on action
Details Power on.
Send this command to power on when you are in standby mode .
Receive Successfully
Return Value
Receive unsuccessfully "？" [CR]
2.2 PoWER oFF command（Shut down immediately ）
Command "C01"[CR] (Sixteen decimal value: 41 30 31 0d)
Power off.
Details
Send this command to shut down when you are in the power-on mode .
Receive Successfully
Return Value
Receive unsuccessfully "？" [CR]
2.3 PoWER oFFcommand
Command "C02"[CR] (Sixteen decimal value: 41 30 32 0d)
Power off.
Details Send this command to pop up [PoWER oFF] dialog box when you are in the
power-on mode,then send this command once again to power on.
Receive Successfully
Return Value
Receive unsuccessfully " ？ " [CR]
2.4 VgA command
Command "C05"[CR] (Sixteen decimal value: 41 30 35 0d)
Details Select VgA input
Receive Successfully
Return Value
Receive unsuccessfully "？" [CR]
Command
C06
C32
C33
[ACK]［CR］
[ACK]［CR］
[ACK]［CR］
[ACK]［CR］
37
option
Component
DVi
Video
RgBHV