Key Operator Functions
Reject Reason
Configuration
(Option)
9-36
This option lets you build a list of reject reasons that a technologist can
choose from when rejecting an image. The following Reject Reasons are
defaults and can be used or deleted:
– Clipped Anatomy
– Patient Motion
– Positioning Error
You can define up to nine reject reasons. The last reason is always listed as
Other Reason.
To enter Reject Reasons:
At the Key Operator Functions menu, select System Configuration,
1.
then select Workflow Optimization.
Select Next.
2.
Select Reject Reason.
3.
Reject Reason
Select the Reject Reason field.
4.
Type up to 30 characters for the reason and select + to add it to the
5.
Reason List.
1F1976
August 1, 2003