Chemical Resistance Of Tags - Omron V670-CF01 User Manual

SECTION 6
Appendices

Chemical Resistance of Tags

Chemicals that affect Tags are shown below.
ABS resin is used for case material and epoxy resin for filling material. Refer the following lists and do
not use chemicals that effect ABS and epoxy resin. Use only chemicals that do not effect these resins.
Tags cannot be used in applications with explosion-proof specifications.
Chemicals That Cause Deformations, Cracks, etc.
Trichlene, acetone, xylene, toluene, gasoline, creosol,
methylene chloride, phenol, microhexanone, aqua regia,
chromic acid, sulfur (90% RT), methyl ethyl ketone, aniline,
nitrobenzene, monochlorobenzene, pyridine, nitric acid (60%
RT), and formic acid (80% RT)
Chemicals That May Cause Discoloration, Swelling, etc.
Hydrochloric acid, alcohol, freon, sodium hydroxide, hydrogen
peroxide, benzine, sulfuric acid (10% RT), nitric acid (10%
RT), phosphoric acid (85% RT), liquid ammonia
Chemicals That Do Not Affect ABS Resin or Epoxy Resin
Ammonia, kerosene, mineral oil, developer, YUSHIROKEN
S50, CHEMICOOL Z, VELOCITY NO. 3, YUSHIROKEN EEE-
30Y, petroleum, grease, acetic acid, nitric acid, calcium
hydroxide, phosphoric acid (30% RT), hydrochloric acid (10%
RT), and potassium hydroxide.
The above results are from tests conducted at room temperature (23 ° C). Even if the chemicals do not affect the ABS or
epoxy resins at room temperature, they may affect the resins at higher or lower temperatures. Always contact the man-
ufacturer of the chemicals and check the chemicals carefully in advance.
Electromagnetic Inductive RFID System
82
User's Manual
ABS resin
ABS resin
ABS resin
Epoxy resin
Aqua regia, chromic acid, sulfuric acid (90% RT), nitric acid
(60% RT), liquid ammonia, acetone, methylene chloride,
phenol, and trichlene.
Epoxy resin
Sulfuric acid (10% RT), nitric acid (10% RT), hydrochloric acid
(30% RT), acetic acid (50% RT), nitric acid, calcium hydroxide,
benzene, creosol, alcohol, microhexanone, toluene, xylene,
benzine, and grease.
Epoxy resin
Ammonia, hydrochloric acid (10% RT)), potassium hydroxide,
petroleum, gasoline, YUSHIROKEN S50, CHEMICOOL Z,
VELOCITY NO. 3, and YUSHIROKEN EEE-30Y.