Command List - Omron V670-CF01 User Manual

Command List

There are 6 main types of commands.
■ Communications Commands
Communications commands communicate with Tags.
Command
code
RD Read
WT Write
CW Computation Write
DF Data Fill
MD Memory Check
TF Tag Function Designation
ID ID Read
■ Communications Subcommand
The communications subcommand aborts command execution.
Command
code
Command Processing
AA
Abort
■ Controller Control Commands
Controller control commands stop communications with Tags, reset the CF Reader/Writer., etc.
Command
code
SP Parameter Setting
XZ Reset
■ Host Commands
Host commands test communications between the CF Reader/Writer and the Handy Terminal.
Command
code
Test
TS
Version Information
VS
Name
Reads Tag memory data.
Writes data to Tag memory.
Writes memory data and the calculation result to Tags.
Writes designated data to a designated area.
Sets and verifies Tag memory check codes.
Sets/clears the write protection for Tags.
Reads the Tag user ID.
Name
Aborts communications with a Tag.
Name
Sets all CF Reader/Writer parameters.
Resets the CF Reader/Writer.
Name
Checks the status of communications between the Handy Terminal
and the CF Reader/Writer.
Returns data received from the Handy Terminal to as is.
Reads the CF Reader/Writer model information, software version,
and creation date.
Description
Description
Description
Description
Electromagnetic Inductive RFID System
SECTION 4
Commands
Reference
page
p.44
p.45
p.46
p.47
p.48
p.49
p.51
Reference
page
p.52
Reference
page
p.53
p.54
Reference
page
p.55
p.55
41
User's Manual