Features - Omron V670-CF01 User Manual

SECTION 1
Product Outline

Features

The V670-CF01 CF Reader/Writer combines the V670-series Antenna and Controller into a single unit with a
CF interface. It has superior portability and operability because it can be by slotting it into a CF card slot (Type
II) on a Handy Terminal. Tag data can be read and written using serial communications from the Handy
Terminal.
The following three types of ID Tags ("Tags") can be used with the CF Reader/Writer.
Model
V670-D13F03
V670-D13F01
V670-D13F01H
Refer to Tags for detailed Tag specifications.
p.70
Ferroelectric memory (FeRAM) is a type of non-volatile memory that can write data much faster than previous types of memory,
such as EEPROM and flash ROM, and it has a semipermanent writing life. Furthermore, the previous types of memory could no
longer hold data if nothing had been written to the memory for a certain period (approximately 10 years). FeRAM, on the other
hand, is far better for data storage because it can hold data as long as data is read or written within a specific period of time.
Electromagnetic Inductive RFID System
10
User's Manual
Protective Cover
V670-A75SH155S
V670-A75SY8046
The V670-D13F03 ID Tag has a memory capacity of 128 bytes. It is a 40 ×
40 mm square tag with water-resistant properties. It also uses a highly effi-
cient, non-volatile ferroelectric memory, called FeRAM, as internal mem-
ory. FeRAM has a semipermanent life (i.e., it can be accessed 1 billion
times).
The V670-D13F01 ID Tag is a 8 × 16 mm rectangular tag. It is highly
chemical resistant because a PPS case and highly chemical-resistant
epoxy resin is used on the exterior. It has the same memory capacity and
performance as the V670-D13F03.
The V670-D13F01H ID Tag has the same performance and construction
as the V670-D13F01. It has holes for easy mounting.
Handy Terminal
RZ-N155S (Manufactured by Sharp)
PDT8046 (Manufactured by Symbol Technology)
Description
CF Reader/Writer
V670-CF01