Table of Contents
Advertisement
FRONT PASSENGER SEAT
POSITION MEMORY SYSTEM
The microcomputer can memorize the position of the front
passenger seat. Two different seat position profiles can be
entered into the computer's memory.
Recording a seat position in the computer's memory can only
be done when the ignition key is in the "ON" position and the
selector lever is in the "P" position.
Setting the front passenger seat position
1. Adjust the front passenger seat to the desired position.
2. While pushing the "SET" button, push button "1" or "2"
until the signal beeps.
The beep sound means that the positions are recorded in the
computer's memory.
OCCUPANT RESTRAINT SYSTEM
By repeating these two steps and pressing the remaining
button, the seat position for another passenger can be
recorded.
To set a new memorized position, select the desired position
and perform step 2. The previous memory will be erased and
the new position will be set.
To make only slight changes to an already memorized position,
the easiest way is to first activate the memorized position, then
make the desired changes and perform step 2 above.
Recalling the memorized position
When you push button "1" or "2", the seat position will be
automatically adjusted to the position recorded for that
button.
167
Advertisement
Table of Contents
