Driving Position Memory System; Setting The Driving Position - Lexus ES330 2005 Owner's Manual

CAUTION
D When using the lower anchorages for the child
restraint system, be sure that there are no irregular
objects around the anchorages or that the seat belt is
not caught.
D Push and pull the child restraint system in different
directions to be sure it is secure. Follow all the
installation instructions
manufacturer.
D Do not install a child restraint system on the rear seat
if it interferes with the lock mechanism of the front
seats. This can cause death or serious injury to the
child and front passenger in case of sudden braking
or a collision.
The microcomputer can memorize the positions of the driver's
seat, accelerator and brake pedals, and outside rear view
mirrors. Two different driving position profiles can be entered
into the computer's memory.
Recording a driving position in the computer's memory can
only be done when the ignition key is in the "ON" position and
provided by its
the selector lever is in the "P" position.

Setting the driving position

1. Adjust the driver's seat, accelerator and brake pedals,
and outside rear view mirrors to the desired position.
2. While pushing the "SET" button, push button "1" or "2"
until the signal beeps.
The beep sound means that the positions are recorded in the
computer's memory.
OCCUPANT RESTRAINT SYSTEM
DRIVING POSITION MEMORY
SYSTEM
165