Appendix - Install Windows Xp In Qbox - Foxconn QBOX N270 User Manual

Install Windows XP in QBOX
By default, the QBOX has been installed Celavie Operating System for you. But if you
do not like the operation system interface, you can install Windows XP by yourself.
What kinds of hardware and software you need here :
1. USB CD-ROM drive.
2. QBOX driver CD.
3. Windows XP Install CD.
Before we continue :
power cord to AC power.
Install a New Windows XP
1. Press <DEL> to enter BIOS Setup during POST.
2. Set the "1st Boot Device" to "USB CD-ROM" in "Boot", save changes and exit BIOS.
3. Insert the Windows XP Install CD into the USB CD-ROM drive.
Main Advanced Security Boot Exit
Boot Settings
Quick Boot
Quiet Boot
Onboard LAN Boot ROM
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
1st Removable Drive
2nd Removable Drive
1st Hard Disk Drive
1st CD/DVD Drive
BIOS SETUP UTILITY
Boot
sequence from the
[Enabled] available devices.
[Disabled]
A device enclosed in
[Disabled] parenthesis has been
disabled in the
corresponding type
[USB:Optiarc DVD RW] menu.
[HDD:PM-FUJITSU MHZ]
[USB:Generic- SD/MM]
[Network]
[USB:Generic- SD/MM]
[USB:Generic- MS/MS] +-
F1
[HDD:PM-FUJITSU MHZ] F7
[USB: Optiarc DVD RW] F10 Save and Exit
ESC Exit
23
Select Screen
Change Field
General Help
Discard Changes