Connection Of Qbox; Connect The Monitor; Connect The Usb Devices; Connect The Network Cable - Foxconn QBOX N270 User Manual

2-2 Connection of QBOX

1. Connect the Monitor

Connect the VGA cable, with VGA connectors on each end, to the VGA port on the QBOX, and
the other end to a monitor.

2. Connect the USB Devices

Connect USB devices to the USB port on the QBOX, for example, Mouse and Keyboard.

3. Connect the Network Cable

If you want to obtain network access by using the built-in Ethernet controller, there are two ways
for choosing.
1. Use the RJ-45 LAN port. Connect the RJ-45 cable, with RJ-45 connectors at each end, to the
RJ-45 port on the QBOX and the other end to the hub or switch.
Hub
or
Switch
RJ-45 Cable
7