Selecting A Tone Length; Setting A Start-Up/Power-Off Tone; Using Voice Prompt - Sanyo SCP-4920 User Manual
Dual band/tri mode phone
Hide thumbs
Also See for SCP-4920:
- User manual (78 pages) ,
- User manual (230 pages) ,
- Operating manual (74 pages)
Table of Contents
Advertisement
Selecting a Tone Length
To select a tone length:
1.
Press
2.
Select Settings and press
3.
Select Sounds and press
4.
Select Others and press
5.
Select the menu under Tone Length and press
6.
Select Short or Long and press
Setting a Start-up/Power-off Tone
1.
Follow steps 1-4 in "Selecting a Tone Length."
2.
Select the menu under Start-up Tone or Power-off Tone and
press
3.
Select your desired tone and press
Tip:
You can set the volume of Start-up Tone and Power-off Tone. See next page.
Using Voice Prompt
This feature allows you to hear voice prompts at Voice Recorder,
Screen Call setting, Voice Dial, etc. (default setting is On).
To deactivate this feature:
1.
Press
2.
Select Settings and press
3.
Select Sounds and press
4.
Select Others and press
5.
Select the menu under Voice Prompt and press
6.
Select Off and press
Tip:
When ringer volume is set to "Silence All," voice prompts cannot be heard.
to access the main menu.
.
to access the main menu.
.
.
.
.
.
.
.
.
.
.
.
26
Advertisement
Table of Contents
