Selecting A Tone Length; Using Voice Prompt - Sanyo SCP-8400 User Manual

Selecting a Vibrate Pattern
With this feature, you can select a vibrate pattern for incoming calls,
messages, and alarms.
To select a vibrate pattern:
1.
Select
2. Select Voice Calls, Push 2 Talk, Voicemail, Messaging, or
Calendar/Alarm. The following items require an additional step:
Voice Calls: select With Caller ID or No Caller ID.
Push 2 Talk: select Push 2 Talk Calls or P2T Missed.
Messaging: select Text or Picture Msg.
3.
Use your navigation key to select a vibrate pattern and press

Selecting a Tone Length

To select a tone length:
1.
Select
2. Select Short or Long.
Setting a Start-up/Power-off Tone
To set a Start-up/Power-off tone:
1.
Select
2. Select Start-up Tone or Power-off Tone.
3.
Scroll to your desired tone and press

Using Voice Prompt

This feature allows you to hear voice prompts when using Voice
Recorder, etc. (default setting is Off).
To enable or disable voice prompt:
1.
Select
2. Select On or Off.
Tip:
When ringer volume is set to "Silence All", voice prompts cannot be heard.
28
> Settings > Sounds > Vibrate Pattern.
> Settings > Sounds > Others > Tone Length.
> Settings > Sounds > Others.
> Settings > Sounds > Others > Voice Prompt.
.
2. Your Phone's Settings
.