End-Of-Call Options; Saving A Phone Number - Sanyo SCP-4920 User Manual

End-of-Call Options

To display the following options, press Options (right softkey) within
10 seconds after disconnecting a call.
To select an option, highlight it and press
Call Again to dial the phone number.
Call:Speaker On to dial the phone number in speakerphone mode.
Save Phone# to save the phone number in your Contacts list.
Go to Phone Book appears when the number is already in
your Contacts list. (See "Saving a Phone Number" below.)
Note:
The End-of-Call options are not displayed for calls identified as No ID or
Restricted.

Saving a Phone Number

Your phone can store up to 500 phone numbers in up to 300
Contacts entries (an entry may contain up to seven numbers). Each
entry's name can contain 16 characters. Your phone automatically
sorts the Contacts entries alphabetically.
To save a number from standby mode:
1.
Enter a phone number.
2. Press Options (right softkey).
3. Highlight Save Phone# and press
4. Select a label by highlighting Mobile, Home, Work, Pager, Fax,
Other, or No Label and press
5.
Enter a name and press
If you have already stored entries in the Contacts list, you are
prompted to select the following entry modes:
New Name to enter a new name.
From Ph. Book to select a name from the Contacts entry list.
6. Press Save (left softkey).
After you have saved the number, the new Contacts entry is
displayed. (See "Contacts List Entry Options" on page xx.)
.
.
.
.
15