Reviewing Voice Recordings - Sanyo SCP-4920 User Manual

Reviewing Voice Recordings

To play the recordings you have recorded:
1. From the voice recorder menu, select Play or Play:Speaker, and
press
2. Select Voice Data and press
3.
Select a recording from the list and press
– or –
If you want to play all voice recordings continuously, highlight
All and press
4.
Press
Press Speed (left softkey) to change the playing speed.
Press Pause (right softkey) to pause. To restart, press Play
(right softkey).
Tip:
Press and hold the navigation key right to fast-forward the recording;
press and hold the navigation key left to fast-rewind.
To set the starting point of the recordings:
1.
From the voice recorder menu (see the previous page), select
Play or Play:Speaker and press
2. Select Voice Data and press
3. Select your desired recording and press Options (right softkey).
4. Select Go to Time and press
5. Enter the time you want to start, and press OK (left softkey).
Tip:
appears when the recording is longer than 30 seconds.
Go to Time
Tip:
Set the time by 30 seconds.
.
.
to stop playing.
.
.
.
.
.
90