Maintenance Schedules; Routine Maintenance - Mercury 2.8 EI 200 Manual

SECTION 5
00000 was CD937 with deletions, and with added from CE511

Maintenance Schedules

*
1
2
25 hours or 30 days whichever occurs first.
3
CMD-4081877 / 90-865861040 MARCH 2004

Routine Maintenance *

Check the engine oil level (interval can be
extended based on experience).
Check the coolant level.
If operating in salt, brackish or polluted
waters, flush the cooling system after each
use.
Drain any water from the fuel filter after each
use (If operating in freezing temperatures).
Check the transmission fluid level
Check the water inlets for debris or marine
growth. Check the seawater strainer and
clean.
Check the battery connections and fluid
level.
Operating in Saltwater Only: treat the engine
surface with corrosion guard.
1
Clean the air filter.
Ensure that the gauges and the wiring
connections are secure. Clean the gauges.
Only perform maintenance which applies to your particular power package.
Or every 50 hours whichever occurs first.
Or every 50 hours, whichever occurs first. If operating in saltwater, interval is reduced to every
If operating in only freshwater, this maintenance may be extended to every four months.
Each Each
Day Day
Start End
D
D
D
2
MAINTENANCE
Every
Weekly
Two
Months
D
D
D
D
D
D
D
Page 53