Managing Connections
Listing all virtual circuits
To list the details of all virtual circuits, enter the
Command:
The
vport connections all
circuits such as ILMI signalling that are set up on the M770 ATM Switch.
Information displayed in the output is described in Table 6.7.
Listing switch virtual circuits
To list the details of all SVCs, enter the
Command:
Example:
Parameters:
The
vport connections svcs
Table 6.7.
Cajun M770 ATM Switch User's Guide
M15-155s8:/>vport connections all
command displays all SVCs, PVCs, and internal virtual
vport connections svcs
M15-155s8:/>vport connections svcs [nomesh] [addr] [td]
[<vport id>] [src|dst] [<vportid>] [dir]
M15-155s8:/>vport connections svcs nomesh addr 8.1.0
Lists SVCs passing through the vport (except for
[nomesh]
LANE mesh SCVs)
Lists the ATM addresses where available
[addr]
Displays the ATM Traffic Descriptor
[td]
Lists all SVCs passing through the vport
[<vport id>]
Lists the incoming/outgoing SVCs from/to the
[<vport id>]
[src|dst]
vport
Lists all SVCs between the two vports
[<vport id>]
[<vport id>]
Lists all SVCs from the 1st vport to the 2nd vport
[<vport id>]
[<vport id>]
dir
command displays the information described in
Chapter 6
Managing Virtual Ports
vport connections all
command.
command.
83