Table of Contents
Advertisement
Preparation
Make sure you have:
❑
A small flat-blade screwdriver.
❑
A small Phillips screwdriver.
❑
iMarc SLV ISDN Dial Backup Module (DBM) Installation Instructions (Document
No. 9000-A2-GN19) if installing an ISDN PRI DBM.
If an iMarc NAM with DBM is being replaced, the DBM must be transferred to the
replacement NAM.
❑
If desired, an operable Ethernet LAN (Local Area Network) connection for access
by an NMS (Network Management System)
❑
Configuration information for the iMarc unit being installed or replaced.
❑
Appropriate cables:
— DSX cable
— Data port cables
— COM port-to-terminal or COM port-to-PC cable
— Modem cable
— ISDN PRI cable, if applicable
— Ethernet cable, if applicable
See the appropriate manual for additional information.
„
For troubleshooting, see the iMarc SLV Operations Guide
„
For technical specifications, and connectors, cables, and pin assignments, see the
iMarc SLV Technical Description
Cables You May Need to Order
If connecting to a . . .
T1 line interface/connector
(For use in Canada)
DSX-1 Cable
Contact your sales representative to order cables.
Safety Instructions
Please read the
Important Safety Instructions
Order a . . .
T1 line interface cable,
RJ48C-to-CA81A
DSX-1 Adapter Cable
8-Pin modular plug-to-DB15 socket
on page 30.
3
Feature
Number
3100-F1-510
9008-F1-560
Advertisement
Table of Contents
