Setting Of Internal Printer - OsteoSys SONOST 3000 User Manual

User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation: SONOST 3000

3.1.4 Setting of Internal Printer

 Paper type : Thermal paper width 58mm. thickness : MIN 0.07mm
(About 80 reports are printable by one roll)
 Paper character : Only printable in an outer surface
 Purchasing : Purchase from the headquarters or an agency.
 Paper inserting
① Cover opening : Pull-down open the dark gray cover on the device's the
② Paper inserting : Insert the paper as shown below.
OT00-2F0423-01
back side
Outer surface of paper should face to the inside of the
device.
Paper is scrolled in automatically.
１７
DOC. No. : OT06-2R0422-00-MUL
A4(210 × 297)