Table of Contents
Advertisement
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment and has a proper temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated for
safety.
3) All devices should be connected before powering the extenders.
4) Use shielded straight-thru Cat5e/Cat6 cable with TIA/EIA T568B terminations.
3.2 Connection Procedures
Step1. Connect an HDMI source (such as a Blu-ray player) to the HDMI IN port of the
transmitter with an HDMI cable.
Step2. Optionally connect a local display to the HDMI OUT port of the transmitter with
an HDMI cable.
Step3. Connect the CAT port of the transmitter to CAT port of the receiver via a
shielded CAT5e/CAT6 cable with shielded connectors.
Step4. Connect an HDMI display (such as an HDTV) to the HDMI OUT port of the
receiver with an HDMI cable.
Step5. When using the bi-directional IR control, do the following.
a) Connect the included IR receiver to the IR IN port at the receiver.
b) Connect the included IR emitter to the IR OUT port at the other end.
Step6. Connect the included DC 5V power adaptors to the power ports on the
transmitter and receiver.
Step7. Optionally adjust the EQ switch on the receiver to compensate for cable distance
(see page 3).
Step8. Optionally adjust the EDID switch on the transmitter to select which display will
provide EDID information to the source, the local display (if connected) or the
remote display connected to the transmitter (see page 2).
Note: If you are having issues achieving a solid picture on the display, adjust the display's
refresh rate (for example a 24Hz refresh rate may work better than a 60Hz refresh rate).
TL-TP50-HDIR User Manual
4
www.tlnetworx.com
Advertisement
Table of Contents
