System Connection; Usage Precautions; System Diagram; Connection Procedure - Techlogix TL-TP70-HDC User Manual

3. System Connection

3.1 Usage Precautions

1) System should be installed in a clean environment that has a proper temperature
and humidity.
2) All of the power switches, plugs, sockets and power cords should be installed
properly.
3) All devices should be connected before powering on the devices.
4) The twisted pair terminations for the devices should be a straight-thru conforming
to the TIA/EIA T568B standard.

3.2 System Diagram

3.3 Connection Procedure

Step1. Connect an HDMI source (such as a set top box) to the HDMI IN port of the
transmitter with an HDMI cable.
Step2. Connect TP OUT port of the transmitter to TP IN port of the receiver using a
twisted pair cable.
Step3. Connect an HDMI display to HDMI OUT port of the receiver with an HDMI
cable.
Step4. If IR control is required, perform the following:
a) Connect the IR emitter to the IR OUT port on either the transmitter or
CAT5e
INPUT
HDMI
TL-TP70-HDC User Manual
IR Remote
5
HDMI
Projector
www.tlnetworx.com