Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Techlogix TL-FO-USB3-02
Summary of Contents for Techlogix TL-FO-USB3-02
- Page 1 TL-FO-USB3-02 USB 3.1, USB 2.0, and USB 1.1 Fiber Optic Extender User Guide...
- Page 2 CE Statement We, TechLogix Networx, LLC, declare under our sole responsibility that the TechLogix TL-FO-USB3-02, to which this declaration relates, is in conformity with European Standard EN 55022, EN 61000 and EN 55024.
-
Page 3: Table Of Contents
Contents Introduction..................................... 4 TL-FO-USB3-02 Product Contents ............................4 About the TechLogix TL-FO-USB3-02 ............................4 Device Overview ..................................... 5 Host Extender ....................................5 Client Extender .................................... 6 Installation Guide ................................... 7 Example Application ...................................7 Requirements ....................................7 Fiber Optic Link Cabling ................................7 Installing the TL-FO-USB3-02 System .............................8 Preparing Your Site ................................ -
Page 4: Introduction
QR Card About the TechLogix TL-FO-USB3-02 The TL-FO-USB3-02 incorporates ExtremeUSB-C™ technology, enabling users to extend USB 3.1 beyond the standard 3m cable limit for USB 3.1 peripheral devices. This extender system is composed of two individual units, the Local Extender and the Remote Extender, and has the following key features: •... -
Page 5: Device Overview
Device Overview Host Extender Item Type Description LED is SOLID ON when DC is supplied to the extender unit. LED is OFF when no Power LED power is supplied by the AC Adapter Mode Reserved for manufacturer use. Config Reserved for manufacturer use. LED is SOLID ON when system is functioning normally. -
Page 6: Client Extender
Client Extender Item Type Description LED is SOLID ON when DC is supplied to the extender unit. LED is OFF when no Power LED power is supplied by the AC Adapter. Mode Reserved for manufacturer use. Config Reserved for manufacturer use. LED is SOLID ON when system is functioning normally. -
Page 7: Installation Guide
Remote Extender IP Control Optional Network Connections Requirements To complete installation of the TL-FO-USB3-02, you will also require the following items that are not included with the product: • USB compatible computer (host computer) with a USB compliant operating system •... -
Page 8: Installing The Tl-Fo-Usb3-02 System
Installing the TL-FO-USB3-02 System Preparing Your Site Before you can install the TL-FO-USB3-02, you need to prepare your site: 1. Place the computer where desired and set it up. 2. Ensure to locate the USB device(s) within the cable-length of the computer. If not, adjust the location of the device(s) and/or computer accordingly. -
Page 9: Checking The Installation
1. Open Device Manager to confirm that the TL-FO-USB3-02 has installed correctly. 2. Expand the entry for Universal Serial Bus controllers by clicking the “+” sign. If the TL-FO-USB3-02 has been installed correctly, you should find it listed as two separate instances of “Generic SuperSpeed Hub” or “3.0 Hubs”. -
Page 10: Optional Ethernet Pass Through Connection
Optional Ethernet Pass Through Connection The TL-FO-USB3-02 offers a 100 Mbps Ethernet pass through connection that can be used for a variety of purposes including: • Connecting network devices • Providing Client network access to the same location as the Client Extender •... - Page 11 To ensure the stencil below prints to scale be sure to set the page scaling setting to “none”. 42 mm...
-
Page 12: Troubleshooting
Troubleshooting Problem Cause Solution ALL LEDs are OFF on the Host • The Host Extender and/or Client • Ensure that the AC power adapter is properly and/or Client Extender. Extender is not receiving power from connected to the Host Extender and/or Client the AC power adapter. - Page 13 Problem Cause Solution Both Host and Client Extenders • The Host and/or Client Extender is in • Recover/resume the operating system from are working, but the USB 2 or USB suspend mode. For a variety of reasons, sleep or hibernate modes (refer to your operating 3 LEDs on the Host and Client the host computer may place the Host/ system’s documentation).
-
Page 14: Specifications
Specifications Distance Up to 200m (656 ft) over OM3 or better multimode fiber Maximum Throughput 5 Gbps Traffic Types All Traffic Types Device Types All Device Types Maximum Number of Devices and/or Up to 30 devices Hubs Host EXTENDER USB Connector 1 x USB 3.1 Gen 1 Type B Receptacle Link Connector 1 x Duplex LC... -
Page 15: Technical Glossary
Technical Glossary USB Cables USB cables have two distinct connectors. The Type A connector is used to connect the cable from a USB device to the Type A port on a computer or hub. The Type B connector is used to attach the USB cable to a USB device. USB 3.0 USB 3.0 USB 3.0...
Need help?
Do you have a question about the TL-FO-USB3-02 and is the answer not in the manual?
Questions and answers