To Change The Band Plan - Uniden EZI33XLT+ Owner's Manual

ABOUT YOUR EZI33XLT+ SCANNER

TO CHANGE THE BAND PLAN

You can change the band coverage by band plan .
To switch the band plan between 1 and 2 .
1 . Make sure the power is turned off .
2 . While holding down (1) or (2) key, turn on the scanner .
Band Plan 1...(1) key
Band Plan 2...(2) key
Notice: Any Band Plan change will modify the factory
preset channel steps settings of all bands and the
memory contents of the Emergency bank.
UNIDEN EZI33XLT+
5
Scanner