Local Panel Error Message Table - Kodak DryView 8700 User Manual

User Guide

Local Panel Error Message Table

This table lists all local panel error message numbers. When an error message is
displayed on the local panel, perform the operator action listed next to the message
number. If the listed action does not clear the error message, call for service.
This table does not include status or action messages. Status messages require no
operator action. Action messages include the required operator action.
Message
Number
P116 Open and close the supply door. Press Supply on the local panel.
P121 Turn the imager OFF, wait five seconds, then turn the imager back
P122 ON.
P123
P126
P138 If pressing Supply does not unlock the door, use the mechanical
release (refer to page 4-14). Darken the room before opening the
door to expose as few sheets of media as possible.
P151 Turn the imager OFF, wait five seconds, then turn the imager back
P154 ON.
P173 Close the platen access door.
P177 Close the cartridge manually (refer to page 4-13).
P178 Close the top cover.
P203 Turn the imager OFF, wait five seconds, then turn the imager back
P204 ON.
P205
P206
P208 Use the mechanical release to open the left door (refer to page
4-14).
P221 Turn the imager OFF, wait five seconds, then turn the imager back
P222 ON.
P223
P224
P225
P226
P227
4-2
Operator Action
8599110 2001 March Rev. B