IBM 6150 Hardware Maintenance Manual page 33

TNL SN20-9843 (03-27-87)
to
75X0152
or
75X0166
Key Descriptions
2-10
Service Manual
7. Set the power switch on the IBM RT PC system unit and display to On.
8. Wait for the DIAGNOSTIC OPERATING INSTRUCTIONS to display
(this may take up to 4 minutes).
9.
If
the IBM 5085 is attached, press and hold the Alt key and press the Sw
Keybd key. This switches the keyboard to the IBM 6150. The Sw
Keybd indicator should be On.
10. Read and follow the displayed instructions. If needed, use the program
descriptions in this section for information.
The key descriptions provided here are from the DIAGNOSTIC
OPERATING INSTRUCTIONS displayed when the diagnostic programs
load. Use them to control the diagnostic programs.
Key Function
Enter Signals the program to continue
End Stops the test or action
FlO
Return to the previous menu
Esc Returns to the DIAGNOSTIC OPERATING
INSTRUCTIONS
Page Down Scrolls forward in a list
Page Up
Scrolls backward in a list
Backspace Allows keying errors to be corrected
Ctrl-Alt-Pause Does an initial program load (IPL).