Leica M 240 Instructions Manual page 95

4. Confirm your settings - only possible if the eighth position is
active - by pressing the SET
• A further sub-menu appears, showing
.
numbering?
5. Select or .
Yes No
The X characters are placeholders.
1
or INFO button.
Reset image
Changing picture file names
1. In the main camera menu, (see p. 154/248) select
(page 4,
numbering SETUP
2. select in the sub-menu.
Change file name
• The name of the picture file appears. The first character is
marked as ready for editing.
Positions 1-4 can be changed.
3. The numbers and letters are changed by turning the setting
dial (30) or by pressing up and down on the direction pad (31),
while you select different positions by pressing
– the INFO button (32),
– or the button (21),
SET
– or left or right on the direction pad.
The available characters are upper case letters from
numbers from to and underscore
0 9
through them in an endless loop.
4. Confirm your settings - only possible if the fourth position is
active - by pressing the SET
• The setting menu described under 2. appears again.
Image
section), and
to
A Z
, and you can scroll
_
or INFO button.
EN
,
219