Leica M 240 Instructions Manual page 80

EN Selecting a profile
1. In the picture parameters menu (see p. 154/248) select
.
User profile
• If user profiles are stored, the profile name appears in gray,
while free memory slots are green.
2. Select the required profile in the sub-menu, either one of the
saved profiles, or
Note:
If you change one of the settings for the profile currently in use ---
appears instead of the name of the profile you were previously
using in the initial menu list.
204
.
Default user profile
Renaming profiles
1. In the picture parameters menu (see p. 154/248) select
,
User profile
2. select in the sub-menu, and
Manage profiles
3. select in the sub-menu.
Rename profiles
• The profile name and name appear, with the number marked
as ready for editing.
4. Select the profile to be renamed by turning the setting dial (30)
or pressing up or down on the direction pad (31).
5. Confirm your setting by pressing the
(32) or by pressing right on the direction pad.
• The next position is marked as ready for setting.
6. The numbers and letters in the name are changed by turning
the setting dial or by pressing up and down on the direction
pad, while you select different positions by pressing either
– the button,
INFO
– or the button,
SET
– or left or right on the direction pad.
The available characters are upper case letters from
numbers from to and a space
0 9
them in an endless loop.
7. Confirm your setting - only possible if the last position is active
- by pressing the or
SET INFO
- (21) or button
SET INFO
to ,
A Z
, and you can scroll through
_
button.