Getac V100 User Manual page 168

Your computer may be in an out-of-range situation. Move your

computer closer to the Access Point or another WLAN device it is
associated with.
 Check if there is high interference around the environment and solve the
problem as described next.
Radio interference exists.
Move your computer away from the device causing the radio

interference such as microwave oven and large metal objects.
Plug your computer into an outlet on a different branch circuit from that

used by the affecting device.
Consult your dealer or an experienced radio technician for help.

I cannot connect to another WLAN device.
 Make sure that the WLAN feature is turned on.
 Make sure that the SSID setting is the same for every WLAN device in the
network.
 Your computer is not recognizing changes. Restart the computer.
 Make sure that the IP address or subnet mask setting is correct.
I cannot communicate with the computer in the network when
Infrastructure mode is configured.
Make sure that the Access Point your computer is associated with is

powered on and all the LEDs are working properly.
 If the operating radio channel is in poor quality, change the Access Point
and all the wireless station(s) within the BSSID to another radio channel.
Your computer may be in an out-of-range situation. Move your

computer closer to the Access Point it is associated with.
Make sure that your computer is configured with the same security

option (encryption) to the Access Point.
Use the Web Manager/Telnet of the Access Point to check whether it is

connected to the network.