OBJ_BUCH-3009-001.book Page 21 Thursday, October 13, 2016 11:47 AM
In case of extreme temperatures or variations in
temperature, the accuracy of the measuring tool
can be impaired.
Avoid heavy impact to or falling down of the
measuring tool. After severe exterior effects to
the measuring tool, it is recommended to carry out
an accuracy check (see "Accuracy Check of the
Distance Measurement", page 36) each time be-
fore continuing to work.
Switching On and Off
– To switch on the measuring tool and the laser,
briefly press the measuring button 2 [
– To switch on the measuring tool without the laser,
briefly press the On/Off button 5 [
Do not point the laser beam at persons or ani-
mals and do not look into the laser beam your-
self, not even from a large distance.
To switch off the measuring tool, press and hold the
On/Off button 5 [
The measured values and device settings in the mem-
ory are retained when you switch the tool off.
Measuring Procedure
Once switched on, the measuring tool is in the length
measurement function. For a different measuring
function, press the button 7 [Func]. Select the de-
Bosch Power Tools
English | 21
].
].
1 609 92A 3F7 | (13.10.16)
].