Bosch GLM 500 Professional Original Instructions Manual page 19

OBJ_BUCH-3009-001.book Page 19 Thursday, October 13, 2016 11:47 AM
Display elements (selection)
a Status bar
b Measurement reference level
c Battery indicator
d Measured-value lines
e Result line
f Measuring functions
g Display tilt angle
h Basic configurations
Assembly
Inserting/Replacing the Batteries
Using alkali-manganese or rechargeable batteries is
recommended for operation of the measuring tool.
With 1.2-V-rechargeable batteries fewer measure-
ments could be possible than with 1.5-V-batteries.
To open the battery lid 9, press the latch 10 and re-
move the battery lid. Insert the batteries/rechargea-
ble batteries. When inserting, pay attention to the
correct polarity according to the representation on
the inside of the battery compartment.
When the empty battery symbol appears on the dis-
play, then approx. 100 measurements are still possi-
ble. When the battery symbol is empty and flashes
Bosch Power Tools
English | 19
1 609 92A 3F7 | (13.10.16)