HP FlexFabric 5700 Configuration Manual page 37

Step
6. (Optional.) Configure filtering
of advertised routes.
7. Return to system view.
8. Enter interface view.
9. Enable the IPv6 IS-IS
process on the interface.
Configuring EBGP between an MCE and a PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP-VPN instance
view.
4. Configure the PE as an
EBGP peer.
5. Enter BGP-VPN IPv6 unicast
address family view.
6. Enable BGP to exchange
IPv6 unicast routes with the
specified peer.
7. Redistribute VPN routes.
8. (Optional.) Configure filtering
of advertised routes.
9. (Optional.) Configure filtering
of received routes.
Configuring IBGP between an MCE and a PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP-VPN
instance view.
4. Configure the PE as an
IBGP peer.
5. Enter BGP-VPN IPv6
unicast address family
view.
6. Enable BGP to
exchange IPv6 unicast
routes with the peer.
7. Redistribute the VPN
routes of the VPN site.
Command
ipv6 filter-policy acl6-number
export [ protocol [ process-id ] ]
quit
interface interface-type
interface-number
isis ipv6 enable [ process-id ]
Command
system-view
bgp as-number
ip vpn-instance
vpn-instance-name
peer { group-name | ipv6-address
[ prefix-length ] } as-number
as-number
address-family ipv6 [ unicast ]
peer { group-name | ipv6-address
[ prefix-length ] } enable
import-route protocol
[ process-id [ med med-value ] ]
filter-policy acl6-number export
[ protocol process-id ]
filter-policy acl6-number import
Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
peer { group-name | ipv6-address
[ prefix-length ] } as-number as-number
address-family ipv6 [ unicast ]
peer { group-name | ipv6-address
[ prefix-length ] } enable
import-route protocol [ process-id [ med
med-value ] ]
34
Remarks
By default, IPv6 IS-IS does not
filter advertised routes.
N/A
N/A
By default, IPv6 IS-IS is disabled
on an interface.
Remarks
N/A
N/A
N/A
By default, no BGP peer is
configured.
N/A
By default, BGP does not
exchange IPv6 unicast routes with
any peer.
By default, no routes are
redistributed into BGP.
By default, BGP does not filter
advertised routes.
By default, BGP does not filter
received routes.
Remarks
N/A
N/A
N/A
N/A
N/A
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
By default, no routes are
redistributed into BGP.