HP FlexFabric 5940 Configuration Manual page 35

Step
on the interface.
Configuring IPv6 IS-IS between an MCE and a PE
Step
1. Enter system view.
2. Create an IS-IS process for
an IPv6 VPN instance and
enter IS-IS view.
3. Configure a network entity
title.
4. Create the IS-IS IPv6 unicast
address family and enter its
view.
5. Redistribute VPN routes.
6. Return to system view.
7. Enter interface view.
8. Enable the IPv6 IS-IS
process on the interface.
Configuring EBGP between an MCE and a PE
Step
1. Enter system view.
2. Enter BGP instance view.
3. Enter BGP-VPN instance
view.
4. Configure the PE as an
EBGP peer.
5. Enter BGP-VPN IPv6 unicast
address family view.
6. Enable BGP to exchange
IPv6 unicast routes with the
specified peer.
7. Redistribute VPN routes.
Command
[ instance instance-id ]
Command
system-view
isis [ process-id ] vpn-instance
vpn-instance-name
network-entity net
address-family ipv6 [ unicast ]
import-route protocol
[ process-id ] [ allow-ibgp ]
[ allow-direct | cost cost-value |
[ level-1 | level-1-2 | level-2 ] |
route-policy route-policy-name |
tag tag ] *
quit
interface interface-type
interface-number
isis ipv6 enable [ process-id ]
Command
system-view
bgp as-number [ instance
instance-name ]
[ multi-session-thread ]
ip vpn-instance
vpn-instance-name
peer { group-name | ipv6-address
[ prefix-length ] } as-number
as-number
address-family ipv6 [ unicast ]
peer { group-name | ipv6-address
[ prefix-length ] } enable
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value |
route-policy route-policy-name ]
* ]
32
Remarks
an interface.
Remarks
N/A
N/A
By default, no NET is configured.
By default, the IS-IS IPv6 unicast
address family is not created.
By default, IPv6 IS-IS does not
redistribute routes from any other
routing protocol.
If you do not specify the route
level in the command, the
command redistributes routes to
the level-2 routing table.
N/A
N/A
By default, no IPv6 IS-IS process
is enabled on the interface.
Remarks
N/A
N/A
N/A
By default, no BGP peers exist.
N/A
By default, BGP does not
exchange IPv6 unicast routes with
any peer.
By default, no routes are
redistributed into BGP.