HP FlexFabric 5940 Configuration Manual page 34

Table of Contents

Advertisement

Step
3.
(Optional.) Set the
default preference for
IPv6 static routes.
Configuring RIPng between an MCE and a PE
Step
1.
Enter system view.
2.
Create a RIPng process for
an IPv6 VPN instance and
enter RIPng view.
3.
Redistribute VPN routes.
4.
Return to system view.
5.
Enter interface view.
6.
Enable the RIPng process on
the interface.
Configuring OSPFv3 between an MCE and a PE
Step
1.
Enter system view.
2.
Create an OSPFv3 process
for an IPv6 VPN instance
and enter OSPFv3 view.
3.
Set the router ID.
4.
Disable routing loop
detection.
5.
Redistribute VPN routes.
6.
Return to system view.
7.
Enter interface view.
8.
Enable the OSPFv3 process
Command
[ next-hop-address ] | nexthop-address [ public ]
| vpn-instance d-vpn-instance-name
nexthop-address } [ permanent ] [ preference
preference ] [ tag tag-value ] [ description text ]
ipv6 route-static default-preference
default-preference
Command
system-view
ripng [ process-id ] vpn-instance
vpn-instance-name
import-route protocol [ process-id ]
[ allow-ibgp ] [ allow-direct | cost
cost-value | route-policy
route-policy-name ] *
quit
interface interface-type
interface-number
ripng process-id enable
Command
system-view
ospfv3 [ process-id |
vpn-instance
vpn-instance-name ] *
router-id router-id
vpn-instance-capability simple
import-route protocol
[ process-id | all-processes |
allow-ibgp ] [ allow-direct | cost
cost-value | nssa-only |
route-policy route-policy-name |
tag tag | type type ] *
quit
interface interface-type
interface-number
ospfv3 process-id area area-id
31
Remarks
The default value is 60.
Remarks
N/A
N/A
By default, no routes are
redistributed into RIPng.
N/A
N/A
By default, RIPng is disabled
on an interface.
Remarks
N/A
N/A
N/A
By default, routing loop detection
is enabled.
On an MCE network, you must
disable routing loop detection for
a VPN OSPFv3 process.
Otherwise, the MCE does not
receive OSPFv3 routes from the
PE.
By default, no routes are
redistributed into OSPFv3.
N/A
N/A
By default, OSPFv3 is disabled on

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents