Table of Contents
Advertisement
3.2
Selecting a camera channel or Enable Multi-
video display (for multi-pack only)
The Parent unit has 4 camera channels (
which the video can be displayed and the audio heard. Each Camera
unit is paired with a camera number 1, 2, 3 or 4 when it is registered to
the parent unit, and the parent unit shows the number of the selected
channel at the top right of the display. You will need additional Camera
units registered to the parent unit if you wish to monitor different areas
using this channel option. If a camera channel that is selected is out of
range, the video display will be blank and an out of range beep will be
played.
Note
Handset will skip camera channel that are not paired.
To switch between the channels and to enable multi-video mode, press
F
.
3.3
Pairing camera channels
Any enclosed Camera unit has already been registered and no setup is
required.
For additional units, you will need to pair them to new channels before
you can use them. There are up to 4 camera channels (
3
4
/
) available for pairing. See section "2.4 Registration" for
more details.
3.4
Night vision
The Camera unit has 9 high-intensity infrared LEDs for picking up clear
images in the dark. When the built-in photo sensor detects a low level
of ambient light, the LEDs will automatically activate and the screen on
the parent unit will display in black and white.
3.5
Talk function
Press and hold
Camera unit loudspeaker. The symbol
of the LCD screen.
14
(
on the parent unit to talk to your baby through the
1
2
3
/
/
/
will be displayed at the top
Using the Camera Unit
4
) from
1
2
/
/
Advertisement
Table of Contents
