Use The Camera; Pair A Camera With The Parent Unit; Add A Camera; Remove A Camera - Motorola PIP1200 User Manual

3.7

Use the camera

3.7.1

Pair a camera with the parent unit

See 'Registering the baby (camera) unit to the parent unit (Pairing)' on
page 13.
3.7.2

Add a camera

1. Press MENU on the parent unit. The status bar pops up.
2. Scroll the navigation button to select
3. Scroll the navigation button to select a desired camera (cam *1 / cam 2 /
cam 3 / cam 4) to add it to registration, then press OK to confirm.
Note
If a baby (camera) unit is currently paired with the parent unit, * will appear
next to the camera number (cam *1 / 2 / 3 / 4).
3.7.3

Remove a camera

Press MENU on the parent unit. The status bar pops up.
1.
2. Scroll the navigation button to select
3. Scroll the navigation button to select a desired camera (cam 1 / cam 2 /
cam 3 / cam 4) to remove it from registration, then press OK.
4. The selected camera to be removed is displayed on screen. Press OK to
confirm.
Note
You cannot remove the camera if it is the only registered camera in the parent
unit.
3.7.4

Multi-camera use

You can pair up to 4 cameras with the parent unit. If more than one camera
is paired with the parent unit, you can select which camera to view or set it
in cycle mode, where the parent unit automatically cycles through the paired
cameras every 10 seconds.
To change the camera being viewed:
Press and hold OK when the parent unit is in camera viewing mode to step
through the paired cameras.
shown on the screen.
Note
The audio from a camera can only be heard on the parent unit when that
camera is selected.
16
, then press OK.
, then press OK.
with the selected option
Using the video baby monitor