Setting Up; Selecting Camera Channel; Pairing Camera Channels - Motorola MBP30 User Manual

• The signal strength may also be reduced by other solid structures, like
walls, or by radio or electrical equipment, such as TV's, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
• Use of other 2.4GHz products, such as wireless networks,
Bluetooth systems or microwave ovens may cause interference with
this product, so keep the baby monitor away from these types of
products, or turn them off if they appear to be causing interference.
• If the signal is poor, try moving the parent and/or the baby unit to
different positions in the rooms.
NOTE
Do not place the camera within baby's reach!
3.2

Setting up

• Place the camera in a convenient location and point the lens of the
camera towards the area you want to monitor.
• Tilt the head of the baby unit up or down to your desired position
until the parent unit gets a good reception of the baby.
NOTE
Do not place the camera within baby's reach!
3.3

Selecting camera channel

The Parent unit has 4 camera channels of which the video and audio
feed from the channels can be displayed on the LCD. You will need
additional cameras paired to the parent unit if you wish to monitor
different areas using this channel option.
To switch between the channels, press
3.4

Pairing camera channels

The enclosed camera has already been paired and no setup is required.
For additional cameras, you will need to pair them to new channels
before you can use them. There are up to 4 camera channels available
for pairing. See "2.4 Registration" for more details.
12
F
.
Using the Baby Monitor MBP30