Setting A Frequency With Ti Pulse Input - LSIS S100 Manual

Learning Basic Features
4.1.5

Setting a Frequency with TI Pulse Input

Set a frequency reference by setting the 07 (Frequency reference source) code in the DRV group to
12 (Pulse) and providing 0–32.00 kHz pulse frequency to TI.
Group Code Name
Frequency reference
DRV 07
source
Frequency at
01 maximum analog
input
91 Pulse input display
TI input filter time
92
constant
TI input minimum
93
pulse
Output% at TI
IN 94
minimum pulse
TI Input maximum
95
pulse
Output% at TI
96
maximum pulse
Invert TI direction of
97
rotation
98 TI quantizing level
*Quantizing is disabled if '0' is selected.
TI Pulse Input Setting Details
Code Description
Configures the frequency reference at the maximum pulse input. The frequency
reference is based on 100% of the value set with IN-96.
• If IN-01 is set to 40.00 and codes IN-93–96 are set at default, 32 kHz input to TI
IN-01 Freq at 100%
yields a frequency reference of 40.00 Hz.
• If IN-96 is set to 50.00 and codes IN-01, IN-93–95 are set at default, 32 kHz input
to the TI terminal yields a frequency reference of 30.00 Hz.
IN-91 Pulse
Displays the pulse frequency supplied at TI.
Monitor
Sets the time for the pulse input at TI to reach 63% of its nominal frequency
IN-92 TI Filter
(when the pulse frequency is supplied in multiple steps).
IN-93 TI Pls x1–
Configures the gradient level and offset values for the output frequency.
IN-96 TI Perc y2
76
LCD Display Parameter Setting Setting Range Unit
Freq Ref Src 12 Pulse
Freq at 100% 60.00
Pulse Monitor 0.00
TI Filter 10
TI Pls x1 0.00
TI Perc y1 0.00
TI Pls x2 32.00
TI Perc y2 100.00
TI Inverting 0 No
TI Quantizing 0.04
0–12 -
0.00–
Maximum Hz
frequency
0.00–50.00 kHz
0–9999 ms
0.00–32.00 kHz
0.00–100.00 %
0.00–32.00 kHz
0.00–100.00 %
0–1 -
0.00*, 0.04–
%
10.00