the value displayed is different, proceed to modify it
as indicated in the chapter "Adjustments", in the
sections for parameters HH and LL
- carry out the combustion analysis.
Subsequently:
- remove the analyser probes and close the combustion
analysis sockets with the designated screw
- close the instrument panel, reassemble the cover and
boiler shell, following the procedure described for
dismantling it in reverse order.
The fumes analysis probe must be fully inserted.
IMPORTANT: the function that switches off the boiler
when water temperature reaches a maximum of about
90 °C is still enabled during the combustion analysis
phase.
18
SERIAL NUMBER PLATE
.
N.
230 V ~ 50 Hz
Gas type:
PT-ES-SK-CZ-SI:
G20=20mbar G31=37mbar
DK:
G20=20mbar
HR-YU-RU-RO:
G20=20mbar G31=37mbar
HU:
G20=25mbar G25.1=25mbar G31=37 mbar
IP X5D
P. min. G20=13,5 mbar
Pmw = 6 bar T= 60 °C
B23-C13-C23-C33-C43-C53-C63-C83
Pms = 3 bar T= 90 °C
C13x-C33x-C43x-C53x-C63x-C83x
Gas category:
II2H3P
I2H
II2H3P
II2HS3P
Qn =
Pn =
05/BB1
05/CA3
31
0694
0694BQ0479
NOx: