Table of Contents
Advertisement
140
Part # 8533-096-001 11/16
Return to Table of Contents
Section 10:
Maintenance
Preventative Maintenance
Daily
Step 1:
Clean the top and the cabinet to remove residue.
Step 2:
Clean the soap dispenser and soap lid
Step 3:
Check the drain for leaking and proper draining.
Step 4:
Check the loading door for leaks.
Step 5:
Clean the door seal of all foreign material.
Step 6:
Leave the loading door open to aerate the washer when not in use.
Quarterly
Make sure the power is disconnected before making the following checks.
Step 1:
Check the drive belt for wear and proper tension.
Step 2:
Clean lint and other foreign material from around drive motor.
Step 3:
Check all water connections for leaks.
Step 4:
Wipe and clean the inside of the washer and check all electrical components for moisture and dust.
Step 5:
Remove and clean water inlet hose filters. Replace if necessary.
Step 6:
After any service always replace all panels before reconnecting electrical power.
Semi-Annually
Step 1:
Clean the fan on the bottom of the VFD with dry and clean compressed air.
Annually
Step 1:
Inspect all wire connections for tightness
Step 2:
Inspect and check the tightness of the mounting bolts securing the washer to base frame.
Return to Table of Contents
141
Part # 8533-096-001 11/16
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
